B&B Electronics 3PXCC2a Especificaciones descargar pdf (Pagina 41)

SOFTWARE SET-UP PROCEDURE AE/LZB 119 1894 R1A

7. When a good/successful transmit message box

displays, acknowledge it and return to the

CEC/IMC Manager's main menu by closing the

dialog box. If any error message box displays or no

good/successful transmit message box appears after

ten (10) seconds, the CIM Controller Board may

not be properly installed and/or configured; check

CIM Controller Board installation and DIP switch

settings. Refer to the CEC/IMC Digital Audio

Switch Installation, Set-Up And Troubleshooting

maintenance manual, LBI-38938 as necessary. A

good/successful message box must be displayed

before continuing.

8. Continue with the following Hardware

Configuration transfer procedure.

Sending Console Hardware Configuration

Like console user profiles, a console’s hardware

configuration is sent only to the targeted console from the

CEC/IMC Manager. When the target console receives this

data from the CEC/IMC Manager it will send an

acknowledgment to the CEC/IMC Manager. One important

parameter sent to this console when this procedure is

performed is the console’s Call Director logic ID number.

Send the hardware configuration to the console as

follows. At this time it is assumed the console

application is running and it is on-line with the

CEC/IMC (CIM link is operational):

1. From the CEC/IMC Manager's Configure System

main menu, select Console Configuration. This

action will display the console configuration sub-

menu.

2. From this sub-menu, select Hardware. The

C3 Maestro Hardware Configuration dialog box

displays.

3. Select the console’s number via the respective list

box (range = 1 to 32). Verify the selected number

matches the CIM's console assignment number

defined by the respective CIM's Controller Board

DIP switches.

4. From the Unit ID (LID) text box, verify the

console’s unit ID number does not conflict with any

other console or radio ID number in the system.

5. Optional: Make any required changes and save

changes via the <Save> button. Refer to the

applicable CEC/IMC Manager publication listed in

Table 29 and/or the CEC/IMC Manager’s on-line

help for complete details.

6. Send the hardware configuration to the (target)

console by clicking the <Send> button.

7. When a good/successful transmit message box

displays, acknowledge it and return to the

CEC/IMC Manager's main menu by closing the

dialog box.

8. Continue with the following System Manager

database transfers procedure.

System Manager Database Transfers

System Manager databases contain all system

information for all defined entities (units, groups, sites).

These databases can be transferred to the console via

CEC/IMC Manager operations. Since this data is broadcast

to all consoles in the CEC/IMC system, if possible, all

consoles should be on-line when this transfer occurs. This

avoids having to repeat the process for other consoles at a

later time.

Transfer the unit, group and site databases to the

console(s) as follows:

1. From the CEC/IMC Manager's Configure System

main menu, select System Options. This action

will display the system options sub-menu.

2. From this sub-menu, select File Transfer. The

System Manager/Network Manager Entity

Database dialog box displays.

3. Perform a full group database transfer by clicking

the respective option buttons and then clicking the

<Request From SysMgr> button.

4. Perform a full unit database transfer by clicking the

respective option buttons and then clicking the

<Request From SysMgr> button.

5. Perform a full site database transfer by clicking the

respective option buttons and then clicking the

<Request From SysMgr> button.

6. Perform a full conventional channel database

transfer by clicking the respective option buttons

and then clicking the <Send to CEC/IMC> button.

7. Perform a full console database transfer by clicking

the respective option buttons and then clicking the

<Send to CEC/IMC> button.

8. Exit this dialog box and continue with the

following console privilege list transfers.

NOTE

System Manager database transfers must be

accomplished before sending console privilege

lists.

NOTE

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

B&B Electronics 3PXCC2a Especificaciones Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Redes B&B Electronics 3PXCC2a