B&B Electronics PC Watchdog Timer Card ATXWDT Especificaciones Pagina 94

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 115
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 93
Intel
®
SRMK2 Internet Server Technical Product Specification 94
Quick Boot Disabled
Enabled (default)
Allows the BIOS to skip certain tests while booting. This
decreases the time needed to boot the system.
After Power Failure Stays Off
Last State (default)
Power On
Determines the mode of operation if a power loss occurs.
“Stays Off” keeps system off once power is restored.
“Power On” boots the system after power is restored. “Last
State” restores the system to the same state it was in before
the power failed.
On Modem Ring Stay Off (default)
Power On
APM Mode only: Determines the action of the system when
the system power is off and the modem is ringing.
On LAN Stay Off
Power On (default)
APM Mode only: Determines the action of the system when a
LAN wake up event occurs.
On PME Stay Off (default)
Power On
APM Mode only: Determines the action of the system when a
PCI Power Management Enabled wake up event occurs.
Primary Master IDE
Primary Slave IDE
Secondary Master IDE
Secondary Slave IDE
1
st
IDE (default)
2
nd
IDE
3
rd
IDE
4
th
IDE
2
nd
IDE (default)
3
rd
IDE (default)
4
th
IDE (default)
Configures the peripheral devices. Configurable options for
other IDE devices are similar to Primary Master IDE. Note that
the Primary Master/Slave IDE port is not available on the
baseboard.
1
st
to 6-th Boot
Devices
Floppy (default)
IDE-HDD
ATAPI CD-ROM
ARMD-FDD
ARMD-HDD
Disabled
Intel UNDI, PXE-2.0 (LAN 1)
Intel UNDI, PXE-2.0 (LAN 2)
AIC-7899
AIC-7899
SCSI
Configures the boot sequence from the available devices.
IDE-HDD = Hard disk drive.
ARMD-FDD = ATAPI removable device-floppy disk drive.
Intel UNDI, PXE-2.0 = Network boot using PXE.
Channel B of the Onboard Adaptec SCSI 7899
Channel A of the Onboard Adaptec SCSI 7899
SCSI = If a SCSI device is installed, it will appear as one of the
possible boot devices with the name of device.
10.6 System Management Menu
The menu bar is shown below.
Maintenance
Main Advanced Security Boot
System
Managemen
t
Exit
Table 71 shows the System Management menu. This menu sets server management features.
Table 71: System management menu
Feature Options Description
Serial Features Serial Console Redirection
Disabled
Enabled (default)
Disables or enables serial console redirection.
Configures which COM port to use for serial
Vista de pagina 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 114 115

Comentarios a estos manuales

Sin comentarios