B&B Electronics Vlinx Serial Servers ESP902E Especificaciones descargar pdf (Pagina 27)

Documentation Number: ESP902-2303 Manual Chapter 5 23

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

IP Address

Assign a static IP address using this property. A static IP address is retained

and used each time the server is powered up or starts/restarts. Software or

hardware attempting to access the server will need to use the static address

to access the server. The Network Administrator will assign/establish the static

address or group of addresses to be used. The default IP address is shown on

a label affixed to the bottom cover. Such as IP 192.168.0.1

A dynamic address assigned by the DHCP server may change if the ESP902

looses the Ethernet connection or power is removed. The host (client)

communication software requests a connection to the specific IP address of

the serial server. If the DHCP reassigns a different IP address the software

will not be able to communicate with the hardware. We recommend using a

static IP address.

Net Mask

The default LAN net mask is configured for a Class C address. This may be

changed by the user. Default is 255.255.255.0

Gateway

The Gateway IP address allows users to access the serial server from outside

the LAN.

MAC Address

The MAC address is fixed, not adjustable. It is assigned in the factory. Every

Ethernet device manufactured has it own unique MAC address.

Link Status (Shown in Telnet or Console mode only)

Link status automatically displays the type of Ethernet connection. It will either

display 10BaseT or 100BaseTX in full duplex or half duplex. This will depend

on the LAN, switches, hubs used in the LAN topology.

Server Serial Port (Select 1 or 2)

One port is shown. Make selections for Port 1 (Multi-interface), then select

Port 2 (RS-232) and make selections. Using the ESP Manager, you must click

Update to store settings for that port before changing to the other port. Only

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

Sin comentarios

B&B Electronics Vlinx Serial Servers ESP902E Especificaciones Pagina 27