B&B Electronics Vlinx Serial Servers ESP902E Especificaciones descargar pdf (Pagina 14)

10 Chapter 2 Documentation Number: ESP902-2303 Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104

B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445

Upgrade Mode

You can install newly revised firmware for the ESP902 using RS-232

connections from a PC, through the ESP Manager or through the Virtual COM

port. See Chapter 8 for details.

Console Mode

The Console mode provides access to the configuration menu using RS-232

connections. Connect a null modem crossover cable between the multi-

interface port and one of the computer’s RS-232 serial ports. The ESP902

Serial ports are wired as DTE like a computer using DB9M connectors, so a

crossover cable must be used to connect to another DTE port.

In Console mode the default serial port settings are: 9600 baud, 8 data bits,

No parity, and 1 stop bit. With Windows, you can use HyperTerminal with

VT100 terminal emulation for Console mode configuration. Use the default

settings only if they have not been changed. See Chapter 7 for details.

Bottom View

Serial Connections

RS-232

Signal Name

DTE

RS-232 DB9M

RS-422 RS-485

Carrier Detect In DCD 1 RXDA (−) --

Receive (Rx) Data In RXD 2 RXDB (+)

Transmit (Tx) Data Out TXD 3 TXDB (+) Data B (+)

DataTerminal

Ready

Out

DTR

TXDA (−)

Data A (−)

Signal Ground --- GND 5 GND GND

Data Set Ready In DSR 6 CTSA (−) --

Request To Send Out RTS 7 CTSB (+) --

Clear To Send In CTS 8 RTSB (+) --

Ring Indicator In RI 9 RTSA (−)

Table 2.3 - Serial Connection Pin-outs for RS-232/RS-422/RS-485

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Sin comentarios

B&B Electronics Vlinx Serial Servers ESP902E Especificaciones Pagina 14