B&B Electronics Vlinx Serial Servers ESP901E Especificaciones Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
20 Documentation Number: ESP901-2303 Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
6 Setup Menu
There are three ways to access the setup menu and program the ESP901, Management
software, Console mode, and Telnet. The menu pictured above displays in the ESP901
Management software setup screen.
Instructions on how to move around the menu and change settings pertains to the
Management setup menu but are similar in Telnet.
There are a few pre-defined keys to move around the menu and to save changes.
Space Bar: To refresh the configuration page.
TAB: To move the cursor to next field.
Back Space: To move the cursor to previous field.
Arrow Keys: To move the cursor around the configuration page.
Enter: Telnet only - To open 2
nd
window of selections, confirm a selected
change, or to activate the save, default, reset and status.
Server Name
The server name is user configurable. It is recommended users with more than one
ESP901 connected to the LAN assign a new name to each. When the Manager
software searches for servers on the LAN it will display the server name allowing the
user to distinguish between ESP901’s.
Password
Entering a password activates a security feature on the serial server. Once a password
is entered it will be required to access the menu and make changes.
DHCP
DHCP servers are a part of numerous LAN management systems. The DHCP field
has two selections, “Enable” or “Disable”. Arrow to the desired selection and select
enter.
When enabled, ESP901 will send a DHCP request to the DHCP server, which will
assign a dynamic IP address, net mask, and gateway to the ESP901. If a DHCP server
is not available on the network the ESP901 will time out after 10 seconds and the
default values will remain.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comentarios a estos manuales

Sin comentarios