B&B Electronics Vlinx ESP902 Manual de servicio descargar pdf (Pagina 15)

Introduction

Manual Documentation Number: ESP901-902_5012m Chapter 1 7

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics Ltd – Westlink Commercial Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

Step 5: Re-enter Server Properties to verify the changes have taken

effect, or to view/change the configuration of other ports. Each

port must be configured separately.

Install Virtual COM Ports on PC

Step 1: From the Windows Start menu, run the Install Virtual COM

Ports utility included with the VLINX software,

Step 2: Search for all servers on the network

Step 3: Select a port and map it to an unused COM port (e.g. Port 15).

Configure it for TCP protocol and the appropriate IP address

(determined in the last section).

Figure 4. Configuring the Virtual COM Port

Check Communications

Step 1: From the Windows Start menu, run HyperTerminal

Step 2: Configure HyperTerminal to connect using the COM port

configured in the last section (e.g. Port 15).

Step 3: Set Baud Rate, Data/Parity/Stop, and Flow Control to match

the configuration of the serial device connected to the Serial

Server serial port.

Step 4: Communications with the serial device should now be

operational.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 90 91

Sin comentarios

B&B Electronics Vlinx ESP902 Manual de servicio Pagina 15