B&B Electronics 485T Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 44
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
Owners Manual
2800 Series Marquee
3.1.14 Erase Messages [CTRL-X]
Address Header Erase
Messages
CTRL-B A CTRL-X
02h 41h 18h
Address Header directs the command to the specified marquee. To send the command to a different
marquee, change the second character of the address header to the address of the marquee you wish to send
the command to. If you have disabled the addressing feature of the marquee, do not send the address header
section.
Erase Messages instructs the 2800 to erase all 242 stored in the EEPROM chip.
Use the erase messages command to delete all stored messages from the EEPROM chip. The command takes
several minutes to complete. While messages are being erased, the marquee will display “ERASEING...”.
Note: The default message and other global settings are such as pause time and scroll speed are not erased.
3.1.15 Enable Queuing [CTRL-Y]
Address Header Disable
Queue
CTRL-B A CTRL-Y
02h 41h 19h
Address Header directs the command to the specified marquee. To send the command to a different
marquee, change the second character of the address header to the address of the marquee you wish to send
the command to. If you have disabled the addressing feature of the marquee, do not send the address header
section.
Enable Queue instructs the 2800 to reset, and then enable the message queuing feature.
Enabling the message queue modifies the 2800 message recall behavior. When message queuing is enabled,
the marquee maintains a queue of recalled messages and automatically displays all of them in a round robin
fashion. When message queuing is disabled, each time a message is recalled, any previously recalled messages
are cleared. For more information on disabling message queuing, see manual section 3.1.9.
Note: The queue enabled/disabled setting is stored in EEPROM memory and survives power cycling the
marquee. However, the message queue is stored in RAM and is cleared when power is lost or the marquee
reboots.
Page 30 PB-2149-335B
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comentarios a estos manuales

Sin comentarios